Tips to Use The Right Chain Saw

When it comes to choosing a tungsten chainsaw chain, you should take the following into consideration:

The type of wood you’ll be sawing – Hardwoods like oak, maple, walnut, and hickory are quite heavy and will slow down the Saw. On the other hand, softwoods like pine and cedar are light and easy to cut. This can make it difficult to use the right tool for the job.

The thickness of the wood you’ll be sawing – A chainsaw saw that is too thick will bog down as it tries to pull through the wood. On the other hand, a saw that is too thin can’t penetrate the wood because it isn’t wide enough to cut through the thickness.

The saw’s geometry – This refers to the way the saw is designed to cut. Most chainsaws have a “hybrid geometry” that helps to reduce the vibrations that can be heard while cutting. However, this is only useful in woodlands that have a lot of trees.

Stay Up To Date On Maintenance

There are a few things that you should keep in mind when it comes to the maintenance of your tungsten chain saw, including the following: Be sure to keep a frequent eye on the amount of oil in your chain saw. This is of the utmost significance if you are utilising an inexpensive saw that does not come equipped with an oiler. A chain saw that has been properly oiled will run more smoothly, for a longer period of time, and with less effort. After each time you use the chain saw, make sure to wipe it down.

When you least expect it, you might easily pick up dirt, oil, and other debris on your clothing. This can cause the saw to corrode and slow down its cutting speed. Keeping this from happening is one of the most important things you can do to maintain your saw. You should operate the saw without the chain attached. This enables the chain to stretch while maintaining its coolness, which is especially crucial if you are working outside when the temperature is high.

Cleaning Your Tungsten Chain Saw

When it comes to cleaning your tungsten chain saw, there are a few things you should keep in mind: Use a chain oiler for your chain saw. This will help to keep the chain saw oiled and provide protection against rust and corrosion. Wipe down the chain saw daily. This helps to remove excess oil, dirt, and debris. Wipe the saw down again if you’re planning on using the saw for a long period of time. Keep the chain saw chain clean. Wipe the chain saw chain down with a rag when you’re done using it. This helps to keep the saw chain dust-free, and prevent it from getting gummed up in sawdust.


The tungsten chain saw chain is a durable, light-weight chain that is very effective at cutting through hardwoods and other materials. Unfortunately, it’s not very resistant to rust or corrosion. This means that you should keep it in mind when using your chain saw for extended periods of time. When taking care of your chain saw chain, you can extend the life of your saw by using it properly and maintaining it. Keep reading to learn more about how you can make the most of your tungsten chain saw chain.